The secret to pressure washing for flagstone is using the right method, not the most pressure. In Washington, we match the cleaner and pressure to the surface so it comes out clean without damage. On flagstone, the method we use is low-to-moderate pressure wash.
The right method for the job
Cleaning solution: A stone-appropriate cleaner, tested on a small area first.
Caring for flagstone
Flagstone covers several stones, including sandstone, slate, bluestone and limestone, and they react differently to pressure and chemicals. Softer sandstone flakes if blasted, and mortar joints need care.
Avoid: High pressure on soft or layered stone, and acids on limestone.
How often: Every 1-2 years.
When to book pressure washing for flagstone
- Driveway or walkways look dark, gray or streaky
- Green or black growth in shaded areas and along edges
- Slippery surfaces after rain
- Oil, rust or tire marks you can't scrub out
- You're getting ready to sell, seal or paint
What causes the dirt and stains
- Dirt and pollen that settle into the pores of concrete
- Mold, mildew and algae in damp, shaded spots
- Oil and fluid drips from vehicles
- Rust from sprinklers, furniture and fertilizer
- Tire marks and general foot traffic
Easy upkeep between cleanings
- Sweep off leaves and loose debris so they don't stain
- Blot fresh oil drips with cat litter or an absorbent right away
- Point sprinklers away from walls and walkways to cut down on rust and hard-water stains
- Rinse pollen off with a garden hose during heavy pollen season
Not sure what you're looking at? The free stain identifier and safe pressure guide explain each stain and surface.
Why more pressure isn’t better
- Etched lines and 'zebra stripes' from holding a narrow tip too close
- Water forced into window frames, door sills and siding laps
- Damaged plants and lawns from chemical runoff
- Injuries: a zero-degree tip can cut skin, and wet surfaces are slippery
Our process for pressure washing for flagstone
- Walk the property and note surfaces, stains and anything fragile
- Protect plants, outlets, lights and doors, and move small items
- Pre-treat organic growth and degrease oil spots
- Clean with the right pressure and a surface cleaner for even results
- Rinse, post-treat to slow regrowth, and walk the job with you
How much does pressure washing for flagstone cost?
What moves the price:
- Size: square footage of siding, roof or flatwork
- Condition: heavy growth, old stains and peeling finishes take longer
- Access: number of stories, roof pitch, slopes and how close we can park
- Add-ons: sealing, gutter brightening and other services done in the same trip
These are typical U.S. ranges, not a quote. You get an exact price before any work starts. For a quick estimate, try the pressure washing cost calculator.
Other services for flagstone
- Sidewalk & Walkway Cleaning for Flagstone
- Patio Cleaning for Flagstone
- Pool Deck Cleaning for Flagstone
Serving Washington and nearby towns
Moss and algae make Washington driveways, walkways and patios slippery for much of the year. Cleaning with a surface cleaner and post-treating keeps them safer for longer.
We cover 310 cities and towns across Washington. Find pressure washing for flagstone in your city:
Pressure Washing for Flagstone: frequently asked questions
How much does pressure washing for flagstone cost in Washington?
Pressure Washing for Flagstone typically costs $150-$600 for a typical home's driveway, walkways and patio, and usually takes 1-4 hours. The exact price depends on the size and condition, and you get it before any work starts. Call (555) 010-0000 for a free quote.
Do you use high pressure for pressure washing for flagstone?
For flagstone: usually 1,000-2,000 PSI, depending on the stone. What we avoid: high pressure on soft or layered stone, and acids on limestone. The cleaning solution does most of the work, followed by a gentle rinse.
Is pressure washing for flagstone safe for my plants and pets?
We pre-wet plants and lawns, keep cleaning solutions diluted to what the surface needs, and rinse landscaping again when we finish. Keep pets and children inside until surfaces are rinsed and dry.
How often should I schedule pressure washing for flagstone?
Every 1-2 years. Shade, nearby trees, humidity and heavy traffic mean more frequent cleaning; sunny, dry spots can go longer. Our free cleaning frequency tool gives a recommendation for your climate.
What if it rains on the day?
Light rain doesn't stop most washing, but heavy rain, high wind, lightning and freezing temperatures do. If the weather isn't right, we reschedule at no charge. Our work is backed by a satisfaction guarantee.