Mon-Fri: 7AM-7PM, Sat: 8AM-5PM Licensed & Insured [email protected] Serving all of Washington

Concrete Sealing for Stamped Concrete in Washington

Moderate-pressure wash for stamped concrete. Concrete cleaning and sealing that helps resist stains, water and freeze-thaw damage on driveways, patios and stamped concrete. Typical cost $400-$1,200.

When we handle concrete sealing for stamped concrete in Washington, it comes down to three things: protecting your plants and property, cleaning with the right method, and walking the job with you at the end. With stamped concrete, the right approach is moderate-pressure wash.

Method and pressure

Moderate-pressure washCleaning method
Usually 1,500-2,500 PSI, kept even so the sealer isn't stripped in patchesPressure

Cleaning solution: A sealer-safe cleaner; a degreaser for oil spots.

Cleaning stamped concrete safely

Stamped and colored concrete is usually protected by a sealer. Washing it well is the first step before resealing, and the color and pattern look much better after both.

Avoid: High pressure that strips sealer unevenly or wears off color release on the surface.

How often: Wash yearly; reseal every 2-3 years.

Signs you need concrete sealing for stamped concrete

  • Water soaks in instead of beading
  • Stamped concrete looks faded and dull
  • Surface flaking or spalling has started
  • Stains soak in quickly

What causes the dirt and stains

  • Old sealer worn away by sun and traffic
  • Freeze-thaw cycles and deicing salts
  • Unsealed concrete absorbing oil and water

Easy upkeep between cleanings

  • Do the water test: sprinkle water and see if it darkens the concrete quickly
  • Keep traffic off a newly sealed surface for the time on the label
  • Avoid deicers that contain ammonium nitrate or ammonium sulfate

Not sure what you're looking at? The free stain identifier and safe pressure guide explain each stain and surface.

Common mistakes to avoid

  • Sealing dirty or damp concrete, which traps stains and turns cloudy
  • Slippery finishes without an anti-slip additive
  • Applying too thick a coat, which peels

Our process for concrete sealing for stamped concrete

  1. Clean the concrete thoroughly
  2. Treat stains and let the surface dry
  3. Repair cracks where needed
  4. Apply a penetrating or film-forming sealer
  5. Keep traffic off until it cures

Typical concrete sealing for stamped concrete prices

$400-$1,200Typical range for a typical driveway or patio
1 day plus cure timeTypical time on site
Every 2-5 years, depending on the sealerRecommended frequency

What moves the price:

  • Size: square footage of siding, roof or flatwork
  • Condition: heavy growth, old stains and peeling finishes take longer
  • Access: number of stories, roof pitch, slopes and how close we can park
  • Add-ons: sealing, gutter brightening and other services done in the same trip

These are typical U.S. ranges, not a quote. You get an exact price before any work starts. For a quick estimate, try the pressure washing cost calculator.

Other services for stamped concrete

Serving Washington and nearby towns

Moss and algae make Washington driveways, walkways and patios slippery for much of the year. Cleaning with a surface cleaner and post-treating keeps them safer for longer.

We cover 310 cities and towns across Washington. Find concrete sealing for stamped concrete in your city:

Concrete Sealing for Stamped Concrete: frequently asked questions

How much does concrete sealing for stamped concrete cost in Washington?

Concrete Sealing for Stamped Concrete typically costs $400-$1,200 for a typical driveway or patio, and usually takes 1 day plus cure time. The exact price depends on the size and condition, and you get it before any work starts. Call (555) 010-0000 for a free quote.

Do you use high pressure for concrete sealing for stamped concrete?

For stamped concrete: usually 1,500-2,500 PSI, kept even so the sealer isn't stripped in patches. What we avoid: high pressure that strips sealer unevenly or wears off color release on the surface. We keep the pressure even and controlled, with the right tools for the surface.

Is concrete sealing for stamped concrete safe for my plants and pets?

We pre-wet plants and lawns, keep cleaning solutions diluted to what the surface needs, and rinse landscaping again when we finish. Keep pets and children inside until surfaces are rinsed and dry.

How often should I schedule concrete sealing for stamped concrete?

Wash yearly; reseal every 2-3 years. Shade, nearby trees, humidity and heavy traffic mean more frequent cleaning; sunny, dry spots can go longer. Our free cleaning frequency tool gives a recommendation for your climate.

What if it rains on the day?

Light rain doesn't stop most washing, but heavy rain, high wind, lightning and freezing temperatures do, and sealers and stains need dry weather to cure. If the weather isn't right, we reschedule at no charge. Our work is backed by a satisfaction guarantee.

More services

Popular Exterior Cleaning Services in Washington

House Washing for Wood Siding

Soft wash. Painted and stained wood siding grows mildew and loses its finish faster on the shaded and weather-facing sides.

Typical $300-$700

Roof Cleaning for Cedar Shake Roofs

Soft wash. Cedar shakes grow moss and lichen and turn gray as the wood weathers.

Typical $400-$1,000

Driveway Cleaning for Stamped Concrete

Moderate-pressure wash. Stamped and colored concrete is usually protected by a sealer.

Typical $150-$400

Paver Cleaning & Sealing for Brick

Low-pressure wash. Brick is tough, but the mortar joints are softer than the brick itself, and older soft-fired brick can pit.

Typical $600-$1,800

Exterior Window Cleaning

Exterior window cleaning, often done with a house wash, including frames, sills and screens.

Typical $150-$400

Fence Cleaning for Cedar

Low-pressure wash. Cedar decks and fences turn silver-gray as the surface weathers.

Typical $200-$600

Exterior Mold & Mildew Removal for Vinyl Siding

Soft wash. Vinyl is the most common siding in the U.S.

Typical $250-$700

Fence Cleaning

Fence washing for wood and vinyl fences that removes gray weathering, green algae, mildew and sprinkler stains.

Typical $200-$600

Pressure Washing for Composite Decking

Low-pressure wash. Composite decking doesn't need staining, but it does grow mold and mildew, especially in shade and between boards.

Typical $150-$600

Pressure Washing for Concrete

Pressure wash with a surface cleaner. Plain broom-finish concrete is the surface pressure washing is made for.

Typical $150-$600

Oil Stain Removal

Lifting oil, grease and fluid stains from driveways, garage floors and parking areas.

Typical $100-$300

Soft Washing for EIFS (Synthetic Stucco)

Soft wash. EIFS looks like stucco but is a foam insulation board with a thin acrylic finish coat.

Typical $300-$800

Ready for a cleaner home or business?

Get a free pressure washing quote in Washington. Tell us what needs cleaning and we'll give you a price and the next available date.

Call NowFree Quote